Decelerator or Hand Throttle (STD cab) Position potentiometer voltage is too high
Mid range clutch is not calibrated
Aux 3rd Lower Coil solenoid shorted to 12 volts.
Low pressure switch (+) input shorted to ground
Foot Throttle Position potentiometer voltage is too high (engine controller pin B30)
Mid range clutch is not calibrated
If Failure to cool in electrical system, Compressor clutch not engaging.Expansion valve not functioning. Restriction in refrigerant system. See your John Deere dealer.Faulty wiring or loose connections.Defective temperature control switch.Outside temperature too low, below 21gets warmer.Condenser is overheating. Clean condenser screens, cores and fins of condenser and radiator.